Paver Calculator

Your details

The longer side of the area you are paving.
ft
The shorter side of the area you are paving.
ft
in
in
Picks a typical waste allowance for the cuts each pattern needs. Choose Custom to set your own.
Width of the sand-filled gap between pavers, usually 2-5 mm. Slightly reduces the paver count.
mm
Compacted crushed-stone base below the sand. About 10 cm (4 in) for a patio, more for a driveway. Set 0 to skip.
in
Levelling sand course directly under the pavers, typically 2.5-4 cm (about 1 in). Set 0 to skip.
in
Currency
Pavers needed
910pavers
Bare minimum (no waste)828pavers
Extra for waste82pavers
Area to pave192 sq ft
Gravel sub-base3.2 tons (2.37 yd³)
Bedding sand0.75 tons (0.59 yd³)
Polymeric joint sand3bags (50 lb)
Bare pavers828
Waste allowance82

Buy 910 pavers to cover 192 sq ft with a 10% allowance.

  • That is 828 pavers to fill the bare area plus 82 extra for cuts and breakages.
  • Order all pavers in a single delivery so the colour blends, concrete and clay pavers vary between production batches.
  • Plan on about 0.75 tons (0.59 yd³) of bedding sand and 3 bags of polymeric sand to lock the joints.

Next stepKeep a handful of spare pavers after the job, matching a discontinued colour later is nearly impossible.

 = Powered by OnlyCalculators