Tie Length Calculator

Your details

Enter your full standing height. In imperial mode, enter total inches (e.g. 5 ft 10 in = 70 in).
in
Larger collar sizes sit higher on the chest, effectively reducing the visible tie drop, so a longer tie compensates.
Larger knots consume more tie fabric. A Full-Windsor uses about 5 more inches than a Four-in-Hand, so taller wearers often need an extra-long tie when using a Windsor knot.
Width does not change the required tie length but helps you pick the right product width for your frame and lapel width.
Recommended tie sizeBoys / Short
Boys / Short (up to 54")

The tie length category that fits your measurements

Recommended length54in
Recommended length137cm
Knot fabric use0in extra
Recommended tie width2.75"-3.25" (most frames, medium lapel)
Length needed (calculated)36.4in
54 in
Boys / Short<55Standard55-59Extra-Long59-64XXL / Big & Tall64+

At 5 ft 10 in with a Four-in-Hand knot: Boys / Short (up to 54").

  • A boys or short tie (up to 54") is the right pick. Standard adult ties may drag too low even when tied with a large knot.
  • When tied, the tip of your tie should reach the middle of your belt buckle. If it falls short, try a larger knot; if it hangs past the buckle, try a smaller one.

Next stepLook for ties labeled 54" (137 cm). When shopping, check the product description or "Tall" category filter on menswear sites.

 = Powered by OnlyCalculators