Skip to content
Other

Feet to Miles Converter

Enter a distance in feet and this converter gives you the equivalent in miles, yards, meters, and kilometers in one step. You can also reverse the calculation by entering miles to get feet. The conversion uses the exact international foot definition (1 ft = 0.3048 m, 1 mi = 5,280 ft), so results are always precise. The steps panel shows the arithmetic with your actual numbers.

Your details

Switch between feet-to-miles and miles-to-feet conversion.
Enter the distance in feet you want to convert.
ft
Miles
1mi

Exact distance in miles

Yards1,760yd
Meters1,609.344m
Kilometers1.609344km
00.511610
Fraction of input
Miles
Fraction of inputMiles
10.1
20.2
30.3
40.4
50.5
60.6
70.7
80.8
90.9
101

5,280 feet = 1.000000 miles

  • At a comfortable walking pace of 3 mph, covering 1.00 miles takes about 20 minutes.
  • There are exactly 5,280 feet in one mile and 1,760 yards. The foot is defined as exactly 0.3048 meters.
  • In metric, 5,280 feet equals 1609.34 meters or 1.6093 km.

Next stepNeed the reverse? Switch the converter to Miles to Feet at the top.

Formula

miles=feet5,280feet=miles×5,280\text{miles} = \dfrac{\text{feet}}{5{,}280} \qquad \text{feet} = \text{miles} \times 5{,}280

Worked example

Convert 5,280 feet to miles: 5,280 / 5,280 = 1.000000 miles exactly. In yards: 5,280 / 3 = 1,760 yd. In meters: 5,280 x 0.3048 = 1,609.344 m. In kilometers: 1,609.344 / 1,000 = 1.609344 km.

How many feet are in a mile?

There are exactly 5,280 feet in one statute mile. This figure traces to the Weights and Measures Act of 1593, which set the mile at 8 furlongs, each furlong being 660 feet. The same ratio was confirmed by the International Yard and Pound Agreement of 1959, which defined the foot as exactly 0.3048 meters. Because both definitions are exact, the conversion is exact: every arithmetic result below is not an approximation but a precise equivalence. One mile also equals 1,760 yards (since 3 feet make one yard) and 1,609.344 meters.

How to convert feet to miles

Divide the number of feet by 5,280. For example, a standard American football field from goal line to goal line is 300 feet: 300 / 5,280 = 0.056818 miles. A 5K race is 5,000 meters = 16,404.2 feet = 3.1069 miles. To go from miles back to feet, multiply by 5,280: 1.5 miles = 1.5 x 5,280 = 7,920 feet. The converter above handles both directions and also shows the result in yards, meters, and kilometers.

Feet and miles in everyday use

Feet are the standard unit for short distances in the United States, particularly for building dimensions, elevation (altitude in aviation is given in feet above sea level), and athletic events such as the 100-foot dash. Miles appear on road signs, odometers, and marathon distances. A brisk walk covers roughly 4 miles per hour, which is 5,280 x 4 = 21,120 feet per hour or 352 feet per minute. The mile is also used in aviation and maritime contexts, though the nautical mile (6,076.115 feet) differs from the statute mile (5,280 feet).

Metric equivalents for feet and miles

The international foot is defined as exactly 0.3048 meters, making conversions between the two systems exact. One foot = 0.3048 m = 30.48 cm = 304.8 mm. One mile = 5,280 x 0.3048 = 1,609.344 meters = 1.609344 kilometers. This is why a 10K road race is 32,808.4 feet or 6.2137 miles. The meter-based SI system is the global scientific standard, but feet and miles remain legally recognized units in the United States and United Kingdom for road distances.

Common feet to miles reference

Feet (ft)Miles (mi)Yards (yd)Meters (m)Common reference
1000.01893933.33330.480About 9 parked cars end to end
5280.100000176.000160.9341/10 of a mile
13200.250000440.000402.3361/4 mile (quarter mile, drag strip)
26400.500000880.000804.672Half mile
52801.0000001,760.0001,609.3441 mile
105602.0000003,520.0003,218.6882 miles
158403.0000005,280.0004,828.0325K run start approximation
264005.0000008,800.0008,046.7205 miles
5280010.00000017,600.00016,093.44010 miles
13843526.21893946,145.00042,194.988Marathon (26.2188 mi)

Quick-reference conversions for standard distances. 1 mile = 5,280 feet exactly.

Frequently asked questions

How many feet are in a mile?

There are exactly 5,280 feet in one statute mile. This is an exact figure set by the International Yard and Pound Agreement of 1959, not a rounded approximation.

How do I convert feet to miles?

Divide the number of feet by 5,280. For example, 2,640 feet / 5,280 = 0.5 miles (exactly half a mile). To convert miles to feet, multiply by 5,280: 0.5 x 5,280 = 2,640 feet.

How many feet is a quarter mile?

A quarter mile is 5,280 / 4 = 1,320 feet. This is the standard length of a drag racing strip. In meters, it is 1,320 x 0.3048 = 402.336 meters.

What is a mile in meters and kilometers?

One statute mile equals exactly 1,609.344 meters or 1.609344 kilometers. This exact figure comes from multiplying 5,280 feet by the exact meter definition of one foot (0.3048 m).

What is the difference between a statute mile and a nautical mile?

A statute (land) mile is 5,280 feet or 1,609.344 meters. A nautical mile is defined as exactly 1,852 meters (6,076.115 feet), roughly one minute of arc of latitude on the Earth's surface. Nautical miles are used in aviation and maritime navigation; statute miles are used for land distances in the US and UK.

How far is 10,000 feet in miles?

10,000 feet / 5,280 = 1.8939 miles (rounded to 4 decimal places). In metric, 10,000 x 0.3048 = 3,048 meters = 3.048 kilometers.

Sources

Written by Grace Mbeki, MSc Data Scientist & Educator · Nairobi, Kenya

Turning everyday numbers into clear, actionable answers for the decisions that matter most.

Search 3,500+ calculators

Loading search…