Skip to content
Other

Polar to Cartesian Coordinates Calculator

Enter a radius and angle to convert polar coordinates to Cartesian (x, y), or switch to reverse mode and enter x and y to get the polar form. Choose degrees or radians. The step-by-step panel shows the full working so you can follow every calculation.

Your details

Choose the direction of conversion. "Polar to Cartesian" takes r and angle; "Cartesian to Polar" takes x and y.
Angles can be entered in degrees (0-360) or radians (0-2pi).
Distance from the origin to the point. Must be zero or positive. A negative r flips the angle by 180 degrees.
Angle measured counter-clockwise from the positive x-axis. Enter in the unit you selected above.
deg
x
3.000007

Horizontal Cartesian coordinate

y3.999995
Angle (alternate unit)0.927293
QuadrantQuadrant I (x > 0, y > 0)
Distance from origin5
x coordinate3.000007
y coordinate3.999995

Cartesian result: x = 3.0000, y = 4.0000

  • The point (3.0000, 4.0000) lies in Quadrant I (x > 0, y > 0).
  • Its distance from the origin is 5.0000 (equals r).
  • The same angle in rad is approximately 0.9273.
  • Polar coordinates are non-unique: adding any multiple of 360 deg (or 2 pi rad) to theta gives the same point.

Next stepTo verify, convert back: r = sqrt(x^2 + y^2) should equal your original r, and atan2(y, x) should equal your original theta.

Formula

Polar to Cartesian:x=rcos⁡θ,y=rsin⁡θCartesian to Polar:r=x2+y2,θ=atan2⁡(y, x)\text{Polar to Cartesian:}\quad x = r\cos\theta,\quad y = r\sin\theta\\[6pt]\text{Cartesian to Polar:}\quad r = \sqrt{x^{2}+y^{2}},\quad \theta = \operatorname{atan2}(y,\,x)

Worked example

Point (r = 5, theta = 53.13 deg): cos(53.13 deg) = 0.6, sin(53.13 deg) = 0.8, so x = 5 × 0.6 = 3.0 and y = 5 × 0.8 = 4.0. Reverse check: r = sqrt(3^2 + 4^2) = sqrt(25) = 5, theta = atan2(4, 3) = 53.13 deg.

What are polar and Cartesian coordinates?

Cartesian coordinates describe a point by its horizontal distance (x) and vertical distance (y) from a fixed origin. Polar coordinates describe the same point by its straight-line distance from the origin (r, called the radius or modulus) and the angle that line makes with the positive x-axis (theta). Both systems describe the same set of points in the 2-D plane; the choice of which to use depends on the shape or equation involved. Circles and spirals are simpler in polar form; rectangles and lines are simpler in Cartesian form.

How to convert polar to Cartesian coordinates

The conversion uses two trigonometric identities from the right triangle formed by x, y, and r: x = r * cos(theta) and y = r * sin(theta). The angle theta must be in radians when passed to a calculator or programming language trig function, so convert from degrees first if needed (theta_rad = theta_deg * pi / 180). For example, the point (r = 5, theta = 53.13 deg) gives x = 5 * cos(53.13 deg) = 3 and y = 5 * sin(53.13 deg) = 4. The worked steps panel above shows the full calculation with your exact numbers.

How to convert Cartesian to polar coordinates

Going the other way, r = sqrt(x^2 + y^2) is the straight-line distance by the Pythagorean theorem, and theta = atan2(y, x) gives the angle in the correct quadrant. The atan2 function (available in every programming language and scientific calculator) is preferred over plain atan(y / x) because it handles all four quadrants correctly, including points with a negative x. The result is normalised to [0, 360 deg) or [0, 2 pi rad), but adding any integer multiple of 360 deg gives an equally valid representation.

Degrees vs. radians: which unit to use?

Radians are the natural unit for mathematics and programming. Most trig library functions (Math.cos, numpy.cos, sin() in C) expect radians. Degrees (0-360) are more intuitive for everyday use and are standard in navigation, surveying, and many engineering disciplines. This calculator accepts either unit and shows the converted value alongside the result for easy cross-reference. The conversion is simple: 180 deg = pi rad, so multiply degrees by pi/180 to get radians, or multiply radians by 180/pi to get degrees.

Applications of polar coordinates

Polar coordinates appear wherever circular or radial symmetry is natural. In physics, they simplify problems in orbital mechanics, antenna patterns, and wave propagation. In engineering, they are used in control systems (polar plots), signal processing (Fourier analysis), and robotics (arm positioning). In mathematics, polar equations describe spirals (r = a * theta), roses (r = cos(n * theta)), limacons, and other curves that would have complex Cartesian equations. In navigation, a bearing and a distance (which is a polar coordinate) describes a position more naturally than an x-y offset.

Common angle conversions and Cartesian equivalents (r = 1)

DegreesRadiansx = cos(theta)y = sin(theta)Quadrant
001.00000.0000Positive x-axis
30pi/60.86600.5000I
45pi/40.70710.7071I
60pi/30.50000.8660I
90pi/20.00001.0000Positive y-axis
1202pi/3-0.50000.8660II
1353pi/4-0.70710.7071II
1505pi/6-0.86600.5000II
180pi-1.00000.0000Negative x-axis
2107pi/6-0.8660-0.5000III
2255pi/4-0.7071-0.7071III
2404pi/3-0.5000-0.8660III
2703pi/20.0000-1.0000Negative y-axis
3005pi/30.5000-0.8660IV
3157pi/40.7071-0.7071IV
33011pi/60.8660-0.5000IV
3602pi1.00000.0000Full circle

Unit-circle values for r = 1. For any radius r, multiply x and y by r.

Frequently asked questions

What is the formula for polar to Cartesian conversion?

x = r * cos(theta) and y = r * sin(theta), where r is the radius (distance from the origin) and theta is the angle measured counter-clockwise from the positive x-axis. If theta is in degrees, convert to radians first by multiplying by pi / 180 before passing to the trig function.

How do I convert Cartesian coordinates to polar?

Use r = sqrt(x^2 + y^2) for the radius, and theta = atan2(y, x) for the angle. Always use atan2 (the two-argument form) rather than plain atan(y / x): plain atan only covers two quadrants and gives the wrong angle when x is negative.

Why does polar form use atan2 instead of plain arctan?

atan(y / x) returns an angle only in the range (-90, 90 deg) because it cannot tell whether the numerator and denominator are individually positive or negative. atan2(y, x) receives both values separately, so it correctly places the angle in all four quadrants, covering the full range (-180, 180 deg] or equivalently [0, 360 deg) after normalisation.

Are polar coordinates unique?

No. Adding or subtracting any integer multiple of 360 deg (2 pi rad) to theta gives the same point. Additionally, a negative radius r with angle theta describes the same point as positive r with theta + 180 deg. This calculator normalises theta to [0, 360 deg) or [0, 2 pi rad) as a standard convention, but other representations are equally correct.

What is the difference between polar and cylindrical coordinates?

Cylindrical coordinates extend 2-D polar coordinates into three dimensions by adding a z-axis height. A cylindrical point (r, theta, z) has the same r and theta as the 2-D polar point and adds a vertical component z. For strictly 2-D problems, cylindrical and polar coordinates are the same.

Can I use this for complex numbers?

Yes. A complex number z = a + bi has Cartesian form (x = a, y = b) and polar (or modulus-argument) form z = r * e^(i*theta) = r * (cos(theta) + i*sin(theta)). The radius r = sqrt(a^2 + b^2) is the modulus, and theta = atan2(b, a) is the argument. This calculator performs exactly those conversions.

Sources

Written by Grace Mbeki, MSc Data Scientist & Educator · Nairobi, Kenya

Turning everyday numbers into clear, actionable answers for the decisions that matter most.

Search 3,500+ calculators

Loading search…