Skip to content
Other

Surface Area of a Cone Calculator

Enter the base radius and height (or slant height) of a right circular cone to get its total surface area, lateral surface area, base area, slant height, and volume. Switch between metric and imperial units, and choose which two dimensions you know. All working is shown step by step.

Your details

Choose which two measurements you have.
The radius of the circular base.
cm
The vertical distance from the base centre to the apex.
cm
Total surface area
282.7433cm²

Lateral area plus base area

Lateral surface area204.2035cm²
Base area78.5398cm²
Slant height (l)13cm
Volume314.1593cm³
01k3k123
Scale factor
Surface area (cm²)
Scale factorTotal surface areaLateral area only
0.570.6951.05
0.8159.04114.86
1282.74204.2
1.3441.79319.07
1.5636.17459.46
1.8865.9625.37
21k816.81
2.31k1k
2.52k1k
2.82k2k
33k2k
  • Total surface area
  • Lateral area only

Total surface area: 282.7433 cm²

  • The lateral (curved) surface makes up 72.2% of the total area (204.20 cm²), and the base accounts for the remaining 27.8% (78.54 cm²).
  • The slant height is 13.0000 cm - this is what you need to calculate how much material is required to cover the side of the cone.
  • The cone's volume is 314.1593 cm³. Volume grows with the cube of scale, so doubling all dimensions multiplies volume by eight while only quadrupling the surface area.
  • If you only need to cover the curved side (like a party hat or funnel), use the lateral area only. Use the total surface area when the base is also enclosed.

Next stepTo find how much material you need, add a small margin (5-10%) to account for seams and overlaps in real-world applications.

Formula

l=r2+h2,Alat=πrl,Abase=πr2,Atotal=πr(r+l),V=13πr2hl = \sqrt{r^2 + h^2}, \quad A_{\text{lat}} = \pi r l, \quad A_{\text{base}} = \pi r^2, \quad A_{\text{total}} = \pi r(r + l), \quad V = \tfrac{1}{3}\pi r^2 h

Worked example

A cone with base radius r = 5 cm and height h = 12 cm: slant height l = sqrt(25 + 144) = sqrt(169) = 13 cm. Lateral area = pi * 5 * 13 = 204.20 cm2. Base area = pi * 25 = 78.54 cm2. Total surface area = 282.74 cm2. Volume = (1/3) * pi * 25 * 12 = 314.16 cm3.

What is the surface area of a cone?

A right circular cone has two surfaces: a flat circular base and a curved lateral (or curved) surface that wraps from the base edge up to the apex. The total surface area is the sum of both. If you are covering a cone with material (a party hat, a funnel, a traffic cone, or a roof turret), you need the total surface area. If the base is open, like a funnel or a megaphone, only the lateral area matters. The lateral area equals pi times the radius times the slant height (pi * r * l), while the base is simply the area of a circle (pi * r^2). Added together they give the total surface area: pi * r * (r + l).

Radius, height, and slant height - what is the difference?

The radius (r) is the distance from the centre of the base to its edge. The perpendicular height (h) is the straight vertical distance from the base centre to the apex directly above it. The slant height (l) is the distance measured along the sloping surface from the apex down to the base edge. These three lengths form a right triangle, so l = sqrt(r^2 + h^2). This calculator lets you enter any two of the three (radius plus height, radius plus slant height, or slant height plus height) and it works out the missing one for you.

How to calculate the surface area of a cone - step by step

Step 1: Find the slant height if you do not already have it: l = sqrt(r^2 + h^2). Step 2: Lateral area = pi * r * l. Step 3: Base area = pi * r^2. Step 4: Total surface area = lateral area + base area = pi * r * (r + l). Example: r = 5 cm, h = 12 cm. Slant height = sqrt(25 + 144) = 13 cm. Lateral area = pi * 5 * 13 = 204.20 cm^2. Base area = pi * 5^2 = 78.54 cm^2. Total = 282.74 cm^2.

Practical uses for cone surface area

Knowing the surface area of a cone is useful in many everyday and professional contexts. In construction, architects use it for roof turrets and spires to estimate how much roofing material is needed. In manufacturing, it is used for funnels, silos, and conical hoppers to calculate sheet metal or plastic requirements. In cooking, conical strainers and ice-cream cones are designed with these formulas. Teachers and students use cone surface area problems extensively in geometry courses because the slant height, Pythagorean theorem, and pi all appear together.

Common cone proportions and their surface area composition

Height/Radius ratioSlant height factorLateral area shareCharacteristic
0.5 : 1 (flat, wide)1.118 r53%Party hat / funnel
1 : 11.414 r59%Balanced proportions
2 : 12.236 r69%Tall, narrow cone
3 : 13.162 r76%Very steep cone
Hemisphere (r = h)1.414 r50%Half-sphere equivalent

How the ratio of height to radius affects the lateral vs total surface area split.

Frequently asked questions

What is the formula for the total surface area of a cone?

The total surface area of a right circular cone is A = pi * r * (r + l), where r is the base radius and l is the slant height. If you know the perpendicular height h instead of l, first find l = sqrt(r^2 + h^2), then substitute it in.

What is lateral surface area and how does it differ from total surface area?

The lateral (or curved) surface area is just the area of the sloping side of the cone, without the base. It equals pi * r * l. The total surface area adds the circular base (pi * r^2), giving pi * r * (r + l). Use lateral area when the base is open, and total when the base is closed.

How do I find the slant height of a cone?

The slant height, radius, and perpendicular height form a right triangle, so by the Pythagorean theorem l = sqrt(r^2 + h^2). For example, a cone with radius 3 cm and height 4 cm has slant height sqrt(9 + 16) = sqrt(25) = 5 cm.

Does the surface area change if I only have the slant height and height?

No - you can still find the surface area. From l and h, recover the radius with r = sqrt(l^2 - h^2). Then proceed with the standard formulas. This calculator handles that mode automatically when you select "Slant Height + Height".

Why is the volume of a cone one-third of a cylinder?

A cone with the same base and height as a cylinder holds exactly one-third of the cylinder's volume. This was proved in ancient Greece and can be shown by integration: V_cone = (1/3) * pi * r^2 * h, while V_cylinder = pi * r^2 * h. Three identically shaped cones fill one cylinder of the same base and height.

How do I calculate the surface area of an open cone (no base)?

An open cone uses only the lateral surface area: A_lat = pi * r * l, where l = sqrt(r^2 + h^2). This is what you need for a funnel, a megaphone, or a party hat where the circular opening has no material covering it.

What units does this calculator use?

You can switch between metric (centimetres for lengths, cm^2 for areas, cm^3 for volume) and imperial (inches for lengths, in^2 for areas, in^3 for volume). The formulas are unit-agnostic; just make sure all inputs are in the same unit.

Sources

Written by Grace Mbeki, MSc Data Scientist & Educator · Nairobi, Kenya

Turning everyday numbers into clear, actionable answers for the decisions that matter most.

Search 3,500+ calculators

Loading search…