Fence Estimate Calculator

Your details

Fence style determines picket width, spacing, rails per section, and unit cost.
Measure the full perimeter or run you want to enclose.
ft
Height of the fence above ground. Posts are sized at 1.5x this to allow burial.
ft
Distance between post centres. 8 ft is standard for wood; 10 ft for chain link.
ft
Horizontal rails between two consecutive posts. Wood privacy typically uses 2-3.
Width of one picket or board. Set to 0 if not using individual pickets.
in
Gap between pickets. 0 = solid privacy; 2-3 in = decorative picket style.
in
Gates add 2 extra posts and a gate-kit hardware allowance per opening.
Extra material to order to cover cuts, defects, and mistakes. 10% is typical.
%
Currency
Estimated total costMid-size project
$2,200

Mid-range installed cost (materials + labour)

Posts needed15posts
Rails needed27rails
Pickets / boards231pcs
Concrete bags (60 lb)30bags
Post length (each)9ft
Screws / nails1,032pcs
Fenced length (excl. gates)96ft
Cost low estimate$1,540
Cost high estimate$2,970
Material cost (est.)$880
Labour cost (est.)$1,320
Posts15
Rails27
Pickets / boards231
Concrete bags30

Estimated cost: $2,200 for a wood privacy fence.

  • Your wood privacy fence will likely cost between $1,540 and $2,970 installed.
  • You need 15 posts. Dig each hole to at least one-third of the post length for stability.
  • Order 231 pickets (includes your waste factor). Buy from the same batch to ensure consistent colour and grain.
  • Plan for 27 rails. Pre-treating cut ends prevents rot at notched joints.
  • Gate posts carry more load than field posts - use 4x4 or 6x6 lumber and pack concrete tightly.

Next stepGet at least three contractor quotes, as labour rates vary significantly by region. Always call 811 (USA) before digging to locate underground utilities.

 = Powered by OnlyCalculators